HOPE Carbon Seatpost

Stiff, light and strong: the Carbon Seatpost by Hope
The Hope Carbon seatpost is light enough for road and cross-country use, but also strong enough for downhill. It is 100% designed, tested and manufactured in Barnoldswick, England. Varying wall thicknesses contribute to the optimum weight and reinforce the seatpost in high-load areas.
Specifications:Application:Road, Cross Country, All MountainDiameter:27.2 mm, 30.9 mm, 31.6 mmLength:350 mm, 400 mmSetback:15 mmTechnical Information:Clamp:single boltCompatible Saddle Rails:7 x 7 mm (standard)Material:Carbon (UD, 3K, 1K)Approved For:Insertion Depth (min.):80 mmFeatures:designed, tested and manufactured in Barnoldswick, Englandvery high strength carbon fibre construction with aluminium strutssmooth inner surface without resin formation for reduced weightdifferent material thicknesses depending on the load on the area24 layers saturated with epoxy resinT700 UD Carbon: highest values for tensile strength and stiffness with minimal weightlayers of 3K woven material at certain points increase ring stiffness and thus reduce the risk of failure in case of fallsouter layer of 1K 2×2 woven material contributes to the strength and at the same time to the beautiful appearanceManufacturer Numbers:27.2 mm / 350 mm / SB 15 mm:HSP001CN30.9 mm / 400 mm / SB 15 mm:HSP002CN31.6 mm / 400 mm / SB 15 mm:HSP003CNContents:1 x Hope Carbon Seatpost