OneUp Components Dropper Post V2 210 mm – improved adjustment
The OneUp Components Dropper Post V2 can be described as a completely revised version of the previous OneUp post, Dropper Post 2.0, so to speak. The travel – a maximum of 210 mm in this case – can be reduced by 10 mm or by 20 mm. OneUp Components was crazy about saving as many millimetres as possible on the dropper post to ensure the lowest possible stack height and shortest possible overall length. With this dropper you can position your saddle lower than ever before.
The dropper is controlled via cable (remote not included), includes the metal pins for individual adjustment of the travel and of course the reliable sealed cartridge.
Compared to a hydraulic seatpost, the OneUp Dropper Post is insensitive to temperature and if the remote should suffer damage, you can still adjust it manually. Just take it out of the frame and operate the actuator by hand.
Unlike earlier versions, this Dropper Post can even be installed in Santa Cruz bikes with Lower Link VPP damper linkage.
You want more from a seatpost? Then pick up OneUp.
Specifications:Application:All Mountain, EnduroTravel:210 mmDiameter:30.9 mm, 31.6 mm, 34.9 mmLength:525 mmSetback:0 mmTechnical Information:Actuation:mechanical handlebar remoteCable Routing:internalClamp:2-bolt clampCompatible Saddle Rails:7 x 7 mm (standard), 7 x 9 mm (oval)Material:AluminiumApproved For:Weight Limit:125 kgInsertion Depth (max.):282 mm (297 mm with actuator)Insertion Depth (min.):150 mmFeatures:tons of travel (max. 210 mm) with a 243 mm stack height and a 525 mm effective length (without actuator = 15 mm)375 mm maximum extension lengthtravel can be adjusted by 10 or 20 mm by using metal pins that are placed in guide track (3 for 10 mm, 2×3 for 20 mm)cable actuated for easy installationreliable, sealed cartridgecartridge can be replaced by usereasy to maintain at homecompared to previous model, has a lower total length and stack, also less weightnew DU bushingincreased bushing overlap for increased durabilityActuator V2.1 compatible with Santa Cruz Lower Link VPPModels:30.9 mm / 525 mm / SB 0 mm:
Diameter:30.9 mmLength:525 mmSetback:0 mmManufacturer Number:1C0560
31.6 mm / 525 mm / SB 0 mm:
Diameter:31.6 mmLength:525 mmSetback:0 mmManufacturer Number:1C0561
34.9 mm / 525 mm / SB 0 mm:
Diameter:34.9 mmLength:525 mmSetback:0 mmManufacturer Number:1C0662Contents:1 x OneUp Components Dropper Post V2 210 mm seatpost6 x 10 mm metal pins1 x grease for tubes and sealsOrder Together:V3 Handlebar Remote


















Reviews
There are no reviews yet.